01202 125594

Professional Plastering Services

Plasterboarding & Dry Lining
in Bournemouth

Walls and ceilings boarded, taped and skimmed. From replacing a tired lath and plaster ceiling to boarding out a loft conversion, the aim is a flat, solid surface ready to decorate.

The Service

A straight, solid base for every finish

Dry lining means fixing plasterboard to a wall, ceiling or frame instead of building up wet plaster from scratch. It is quicker, it straightens out walls that are badly out of true, and it gives the finish plaster a consistent surface to go onto.

Boards can go onto timber and metal studwork, ceiling joists and existing walls. Typical jobs are old lath and plaster ceilings that have had their day, new partition walls, loft conversions and garage conversions, and rooms opened up by knocking through.

Getting the boarding right is what stops cracks later. Boards are fixed at the correct centres, joints are staggered and taped, and edges and corners are beaded before a full skim, so the joints can be filled and skimmed flat.

  • Walls, ceilings, partitions and conversions
  • Old lath and plaster replaced with board
  • Joints taped and corners beaded before skimming
  • Ready to decorate once the skim is dry
Plasterer applying plaster over plasterboard joints on a wall Plasterer in a hard hat fixing plasterboard to a ceiling frame

How It Works

How Plasterboarding & Dry Lining Works

What boarding or dry lining usually involves, from bare frame or tired old surface to a wall or ceiling you can paint.

01

Measure & Plan

A plasterer will usually look at the space, what the boards are going onto and what the room will be used for, then specify the right board and put the price in writing.

02

Strip & Prepare

Old lath and plaster or damaged board is taken down and bagged up, and the joists, studs or walls are checked to be sound and true before boarding.

03

Board & Tape

Plasterboard is cut and fixed with joints staggered, screwed at the right spacing, then every joint is taped and every corner beaded.

04

Skim & Dry

A two-coat skim goes over the whole surface for a flat, paint-ready finish, then it is left to dry before decorating.

Need Plasterboarding or Dry Lining in Bournemouth?

Tell us whether it is a ceiling, a new wall or a conversion, with rough sizes, and send your enquiry.

01202 125594

Or request a call back

Areas We Cover

Dry Lining Across Bournemouth & Surrounding Areas

Dry lining enquiries are welcome from right across the area, from lath and plaster ceilings in Charminster and Winton to loft and garage conversions in Poole, Ferndown and Christchurch.

  • Bournemouth
  • Poole
  • Christchurch
  • Southbourne
  • Westbourne
  • Winton
  • Boscombe
  • Ferndown
  • Wimborne
  • Ringwood
  • Verwood
  • New Milton
Check if we cover your postcode
Need help? 01202 125594
Bournemouth & surrounding areas Bournemouth, Poole, Christchurch & Dorset
01202 125594

FAQs

Plasterboarding & dry lining questions

Common questions when a job involves new boards, including whether to board or re-plaster.

01202 125594
How much does plasterboarding cost in Bournemouth?

It depends on the area to be boarded, the type of board, how much needs stripping out first and whether it is being skimmed as well. A written price for the whole job, after seeing the space or clear photos, is the usual approach.

What is the difference between dry lining and plastering?

Dry lining fixes plasterboard in place to create the surface. Traditional plastering builds the surface up with wet backing plaster. Both are usually finished with a skim, and dry lining is often quicker and better for walls that are badly out of true.

Should I replace my lath and plaster ceiling with plasterboard?

If the lath and plaster is sagging, badly cracked or coming away, yes. If it is mostly sound, overboarding can be a quicker and less messy option. A plasterer can look at it and say which makes more sense.

Is plasterboard skimmed afterwards?

Usually, yes. A full skim over taped joints gives one continuous surface. Without it, board joints tend to show through paint.

Can a loft or garage conversion be boarded?

Yes. Once the builder has the frame, insulation and first fix in, the ceilings and walls are boarded, the joints taped and the whole surface skimmed.

Is moisture-resistant or fire-rated board needed?

Where the room calls for it, yes. Bathrooms and kitchens usually take moisture-resistant board, and some conversions need fire-rated board. Follow your builder's or building control's specification where there is one.

How soon can I decorate after dry lining?

Once the skim over the boards is dry and evenly pale, usually within a few days. Start with a mist coat before your finish coats.

Can I send a dry lining enquiry from outside Bournemouth?

Yes. Enquiries are welcome from Poole, Christchurch, Ferndown, Wimborne, Ringwood, Verwood and New Milton, as well as Bournemouth itself.

Contact

Get a Dry Lining Quote

Send over the rooms or spaces to be boarded with rough sizes, and whether there is anything to strip out first. Or give us a call.

Opening hours
Mon–Fri 7:30am–6pm · Sat 8am–2pm · Sun closed
Service area
Bournemouth, Poole, Christchurch & Dorset
Plaster mixed and ready on a hawk

Send an enquiry

Fill in your details and send your enquiry.