01202 125594

Plastering Services

Plasterers in Poole

Skimming, plaster repairs, rendering and dry lining for homes and businesses across Poole, Parkstone, Broadstone and Canford Cliffs.

  • Covering All BH12–BH17 Postcodes

Request a Quote

A few details is all it takes to send your enquiry.

About the Area

Plastering for Poole homes and businesses

Poole covers an unusually wide mix of property. The Victorian terraces around Old Town and Parkstone are largely lath and plaster with textured ceilings added later, while the interwar semis in Oakdale, Alderney and Newtown usually need cracked ceilings and blown patches cutting out before anything is skimmed.

Along the harbour and around Sandbanks, Canford Cliffs and Lilliput, salt air and driving rain are hard on render, so exterior work and K Rend repairs come up far more often. The newer estates at Broadstone, Creekmoor and Upton are mostly plasterboard, where taping, dry lining and full new build skims are the usual jobs.

Knowing what is likely behind the wall helps decide whether a job needs patching, a full re-skim or boarding out first.

  • Period, post-war and new build property
  • Homeowners, landlords, developers and businesses
Plasterer working a backing coat onto blockwork

Our Services

Plastering Services in Poole

From a single ceiling in Parkstone to a full new build package in Upton, choose the service you need below.

01202 125594

Additional Work

Smaller plastering jobs in Poole

Not every job is a full room. These smaller jobs can often be done alongside the main work.

Damp-damaged plaster

Blown and salt-damaged areas hacked off, treated and re-plastered.

Lath & plaster repairs

Period ceilings and walls stabilised or overboarded to match.

Float and set

Backing coat plus skim where walls need building out, not just finishing.

External bead & corner work

Straight arrises on openings, reveals and external angles.

Small patch repairs

Socket chases, removed radiators and doorway infills made good.

Whole-house packages

Every room skimmed to a single programme, priced as one job.

How It Works

How a Plastering Job Works in Poole

What a typical plastering job involves, from the first enquiry to a room ready to decorate.

01

Discuss Your Requirements

Tell us the rooms involved, rough sizes and the condition of the existing walls or ceilings. Photos help describe the job.

02

Assess & Prepare

A plasterer will usually check for hollow or blown plaster, damp and loose paint, then fit beads where needed and PVA or grit-prime the surface so the skim bonds properly.

03

Skim the Surface

Two coats of finish plaster applied wet-on-wet, then trowelled up in stages as it firms so walls and ceilings dry flat.

04

Drying Time

Ask how long the plaster needs to dry and when to mist-coat before you decorate.

Need a Plasterer in Poole?

Tell us what needs doing, then send your enquiry by form or phone.

01202 125594

Or request a call back

Areas We Cover

Plastering Across Poole & the Harbour

Poole runs from Hamworthy and the Quay round to Sandbanks, and north through Parkstone and Oakdale to Broadstone, Creekmoor and Upton.

  • Poole Old Town
  • Parkstone
  • Branksome
  • Oakdale
  • Newtown
  • Hamworthy
  • Creekmoor
  • Broadstone
  • Upton
  • Lilliput
  • Canford Cliffs
  • Sandbanks
Check if we cover your postcode
Need help? 01202 125594
Poole and the harbour All BH12 to BH17 postcodes
01202 125594

FAQs

Plastering questions in Poole

Cost, timings and what to expect. If yours is not here, call and ask.

01202 125594
How much does plastering cost in Poole?

Plastering is usually priced per wall and per ceiling, not by the hour. Condition, access and ceiling height all affect it, so a written quote normally follows a look at the room or clear photos.

Which parts of Poole can I send an enquiry from?

All of it — Old Town, Parkstone, Branksome, Oakdale, Newtown, Hamworthy, Creekmoor, Broadstone, Upton, Lilliput, Canford Cliffs and Sandbanks, across the BH12 to BH17 postcodes.

Can Artex ceilings be plastered over?

In most cases yes. Shallow patterns can be bonded and skimmed over; heavier swirls are scraped back or overboarded first. Pre-2000 textured coatings should always be checked before any dry removal.

Can render on coastal properties be repaired?

Yes. Salt air and driving rain cause cracking and blown patches, which can be cut out and rebuilt in matching K Rend, monocouche or sand and cement.

How long before I can paint newly plastered walls?

Usually three to seven days to dry, longer on solid walls or in winter. Once the surface is evenly pale, start with a mist coat of watered-down emulsion before your finish coats.

Can landlords and letting agents send an enquiry?

Yes. Tenancy turnarounds, including patch repairs, full re-skims and damp-damaged plaster, can be enquired about by form or phone.

Contact

Get a Plastering Quote in Poole

Send the rooms involved and rough sizes, or call to talk it through. Photos help describe the job.

Opening hours
Mon–Fri 7:30am–6pm · Sat 8am–2pm · Sun closed
Service area
Bournemouth, Poole, Christchurch & Dorset
Plaster mixed and ready on a hawk

Send an enquiry

Fill in your details to send your enquiry.